I’ll demonstrate how to make a suitable coil and an inverter circuit for a wireless energy transfer system in this project, which can easily transfer 20W of power. Let’s get going!
Step 1: Hardware Required
- 4x IRLZ44N MOSFET
- 2x IR2113 MOSFET Driver IC:
- 1x Resistor Kit
- 1x Capacitor Kit
- 1x Electrolytic Capacitor Kit:
- 2x UF4007 Diode
- 3x Screw Terminal
- 1x 7805 Voltage regulator
- 1x TLC555 IC
- 1x 74HC4049 IC
- 1x 10k Trimmer
Step 3: Build the Circuit!
You can view images of my finished circuit board and the circuit’s schematic here. You may refer to them as needed.
You can also find the schematic on the EasyEDA website: https://easyeda.com/GreatScott/IR2113_H_Bridge-09e…
Step 4: Success!
You succeeded! You’ve just built a wireless energy transfer system on your own!
Hope you all find this article informative. Superkitz will be back soon with more interesting blogs.
